KENWOOD NXR-710

Frequency Range
・VHF: 136-174 MHz (NXR-710)
・UHF: 450-520 MHz, 400-470 MHz (NXR-810)
RF Output
・VHF: 50 W @ 50% duty, 25 W @ 100% duty (NXR-710)
・UHF: 40 W @ 50% duty, 25 W @ 100% duty (NXR-810)
Repeater Operation
Duplex / Simplex Base Operation
30 CH Scanning Base
Two-Digit LED Display
6 Lighted Programmable Function Keys
Front Panel Speaker
Rear External Speaker Output (4 W Audio)
Volume Control
Microphone Jack
Program Interface
Remote Termination Interface
Programmable AUX I / O’s
RF Power Down Detect
DTMF Front Panel PF Key Control
DTMF AUX Output Control
DTMF AUX Input Monitoring
External Frequency Reference (10 MHz) Connectivity
Windows® PC Programming
Flash Firmware Upgrading

GENERAL
Frequency Range – K 136-174 MHz
Number of Channels 30
Channel Spacing 12.5 / 25 kHz
Analog 12.5 / 15 / 25 / 30 kHz
Digital 6.25 / 7.5 / 12.5 / 15 kHz
PLL Channel Step 2.5 / 3.125 kHz
Current Drain ± 0.5 ppm
Standby 0.5A
Receive 1.0A
Transmit 11.0A
TX Power
50% Duty
100% Duty
50 W
25 W
Frequency Stability ± 1.0 ppm
Operating Voltage 10.8 -15.6 V DC
Operating Temperature Range -22˚ F to +140˚ F (-30˚ C to +60˚ C)
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections not included 19 x 3-1/2 x 13-1/3 inch (483 x 88 x 340 mm)
FCC ID -K K44422300
Weight (net) 21.4 lbs (9.7 kg)
IC Certification – K 282F-422300
RECIEVER
Sensitivity:
Digital @ 6.25kHz (3% BER)
Digital @ 12.5kHz (3% BER)
Analog (12 dB SINAD)
0.22 µV
0.28 µV
0.28 µV
Selectivity
Analog @ 25 kHz
Analog @ 12.5 kHz
83 dB
77 dB
FM Hum & Noise
Analog @ 25 kHz
Analog @ 12.5 kHz
55 dB
50 dB
Intermodulation Distortion 80 dB
Spurious Response 90 dB
Audio Distortion (Ext. SP) Less than 2.5% at 1000 Hz
Audio Output (Ext. SP) 4W (at 4Ω, less than 5% distortion)
TRANSMITTER
RF Power Output 25W to 50W
Spurious & Harmonics 80 dB
FM Hum & Noise
Analog @ 25 kHz
Analog @ 12.5 kHz
55 dB
50 dB
Audio Distortion Less than 1% at 1000 Hz
Modulation 16K0F3E, 11K0F3E, 8K30F1E,
8K30F1D, 8K30F7W, 4K00F1E,
4K00F1D, 4K00F7W, 4K00F2D

Kenwood NXR-710 Brochure